|
.Soft bonding instructions
for :
. Opti-Tape 42
Toupee Tape
. ProFlex II Toupee Tape
. Top Priority Hard Bond Adhesive
. Ultra Hold Adhesive
. Safe Grip Adhesive
. InvisiBond Adhesive
. Vapon Silicon Bonding Adhesive
Extended wear
Hairpiece and Wig bonding using Toupee Tape or Adhesive
Extended wear
Toupee Tape bonding:
Opti-Tape 42
Toupee Tape (aka: EuroBond®)
Opti-Tape 42
Toupee Tape is the best extended wear tape available for bonding
a Hairpiece or Wig for up to a 6-week (42 days) period to your
scalp.
 Bonding periods will differ depending upon each individuals
amount of scalp oil secretion and environment.
Opti-Tape 42
Toupee Tape is two sided sticky clear tape.
Opti-Tape 42 Toupee Tape is available in 3/4" x 3"
&
1.5" x 4" straight strips and 1.25" rear mini
tabs only.
CREATING FRONT
CONTOURS
The 1.5"
x 4" straight strips may be turned into a Front Contour,
if desired, simply by creating a :
1. Chip board template of your Hairpiece or Wig front.
2. Tracing that shape onto a straight strip.
3. Cutting along the outline to create the desired contour.
INSTRUCTIONS
FOR USE
Use the following
step for using:
1. Remove
shielding from one side of tape.
2. Apply tape to Hairpiece or Wig where desired.
3. Remove shielding from second side of tape.
4. Position Hairpiece or Wig on head where desired.
5. PRESS firmly where tape is applied to bond to scalp.
RECOMMENDED CLEANING
SOLVENT TO USE
. Opit-Sol Solvent
---------------------------------------------------------------------------------------------
Extended wear
toupee tape bonding:
Pro-Flex II Toupee
Tape
. Pro-Flex II
Toupee Tape is the second best extended wear tape available for
bonding a Hairpiece or Wig for up to a 3-week (21 days) period
your scalp.
Bonding periods will differ depending upon each individuals
amount of scalp oil secretion and environment.
. Pro-Flex II
Toupee Tape is two sided sticky clear tape.
. Pro-Flex II Toupee Tape is available in Front Contours and
3/4" & 1" x 108" Roll Tape only.
INSTRUCTIONS
FOR USE
Use the following
step for using:
1. Remove
shielding from one side of tape.
2. Apply tape to Hairpiece or Wig where desired.
3. Remove shielding from second side of tape.
4. Position Hairpiece or Wig on head where desired.
5. PRESS firmly where tape is applied to bond to scalp.
RECOMMENDED CLEANING
SOLVENT TO USE
. Opit-Sol Solvent
---------------------------------------------------------------------------------------------
Extended wear
hard bond track bonding system:
Top Priority
Hard Bond Adhesive
. Top Priority
Hard Bond Adhesive is an extended wear adhesive of which may
be used for bonding a Hairpiece or Wig for up to a 6-week (42
days) period your hair.
Bonding periods will differ depending upon each individuals
amount of scalp oil secretion and environment.
. Top Priority
Hard Bond Adhesive is a clear liquid that dries hard.
. Top Priority Hard Bond Adhesive is available in a 1-ounce quantity
only.
INSTRUCTIONS
FOR USE
Use the following
step for using:
1. Remove
shielding from one side of tape.
2. Apply tape to Hairpiece or Wig where desired.
3. Remove shielding from second side of tape.
4. Position Hairpiece or Wig on head where desired.
5. PRESS firmly where tape is applied to bond to scalp.
RECOMMENDED CLEANING
SOLVENT TO USE
. Hard Bond Remover
Solvent
---------------------------------------------------------------------------------------------
Permanent Bonding
Track Tape System
. Permanent Bonding
Track Tape is used in the process for extended wear bonding to
hair.
. Permanent Bonding Track Tape is a one-sided sticky toupee tape.
It is available in 1/2" x 18-yard rolls only.
Use the following
steps for bonding a Hairpiece or Lace Front Wig:
PREPARATION BEFORE
BONDING
Hairpiece or Lace Front Wig
Cut your own hair to 1/8" long to create track for bonding
Hairpiece or Lace Front Wig. (This area must conform with track
on Hairpiece or Lace Front Wig system.
---------------------------------------------------------------------------------------------
Track System
Bonding Instructions
BONDING INSTRUCTIONS
1. Cut desired
length of track tape from roll.
2. Remove shielding from track tape.
3. Apply tape to Hairpiece or Lace Front Wig along track system.
4. Apply desired
front tape or adhesive to front area of Hairpiece or Wig for
securing.
5. Apply and secure Hairpiece or Lace Front Wig to front area.
6. Position Hairpiece
or Lace Front Wig forward over your face.
7. Apply Hard Bond Adhesive to track tape (Allow 3-minutes for
set-up before applying Hairpiece or Wig.)
8. Position Hairpiece or Lace Front Wig over track area.
9. PRESS firmly where adhesive is applied to tape for hair bonding.(Allow
several minutes for adhesive to securely bond to your hair.)
. (Help is normally required for doing this procedure.)
---------------------------------------------------------------------------------------------
Track System
Removal Instructions
REMOVING AND
PREPARING HAIRPIECE OR LACE FRONT WIG FOR RE-BONDING
Over the bonding
period time your own hair will continue growing. As your hair
gets longer your Hairpiece or Wig where bonded will loosen as
your hair becomes longer. Naturally, it will become necessary
to remove your Hairpiece or Wig for cleaning and repair.
Use the following
steps for removing a Hairpiece or Wig:
1. Peel
up the front of Hairpiece or Lace Front Wig where secured using
toupee tape or adhesive.
2. Where the begins at either front temple: peel the Hairpiece
or Wig from the track system that is bonded to your hair.
3. Once the Hairpiece or Lace Front Wig has been removed: Cut
hair in track area to 1/8" long to prepare for bonding Hairpiece
or Lace Front Wig once again.
Cleaning and repairing your Hairpiece or Lace Front Wig
should be done before re-bonding Hairpiece or Lace Front Wig
once again.
---------------------------------------------------------------------------------------------
Extended wear
soft bonding:
Ultra Hold Adhesive
(Use same
instructions for SafeGrip and InvisiBond Adhesives.)
. Ultra Hold
Adhesive is a very good extended wear adhesive of which may be
used for bonding a Hairpiece or Lace Front Wig for up to a 6-week
(42 days) period to your scalp.
Bonding periods will differ depending upon each individuals
amount of scalp oil secretion and environment.
. Ultra Hold
Adhesive is a clear acrylic medical grade adhesive. Quantity:
3.4 ounces
BONDING INSTRUCTIONS
1. Apply Ultra Hold Adhesive to tape tab area (Allow 3-minutes
set-up time before applying Hairpiece or Wig.)
2. Position Hairpiece or Wig where desired for wearing.
3. PRESS firmly where adhesive is applied to tape tab area for
bonding to scalp. (Allow several minutes for adhesive to securely
bond to your hair.) . (Help is not required for doing this procedure.)
RECOMMENDED CLEANING
SOLVENT TO USE
. Opti-Sol Solvent
REMOVING AND
PREPARING HAIRPIECE OR WIG FOR RE-BONDING
When extended wear bonding it is recommended to remove
your Hairpiece or Wig for cleaning and repair.
Use the following
steps for removing a Hairpiece or Wig:
1. Peel up the front of Hairpiece or Wig where secured using
toupee tape or adhesive.
2. Spray or apply solvent to tape residue or adhesive and allow
to soften.
3. Using a solvent soaked sponge; clean residue or adhesive from
tape tape area monofilament material.
Shampooing and repairing your Hairpiece or Wig should
be done before re-bonding Hairpiece or Wig once again.
---------------------------------------------------------------------------------------------
Extended wear
soft bonding:
Vapon Silicon
Bonding Adhesive
. Vapon Silicon
Bonding Adhesive is very good extended wear adhesives of which
may be used for bonding a Hairpiece or Wig for up to a 6-week
(42 days) period to your scalp.
Bonding periods will differ depending upon each individuals
amount of scalp oil secretion and environment.
. Vapon
Silicon Bonding Adhesive is a clear silicon grade adhesive. Quantity:
1 ounce
BONDING INSTRUCTIONS
1. Apply
Vapon Silicon Bonding Adhesive to tape tab area (Allow 3-minutes
for set-up before applying Hairpiece or Wig.)
2. Position Hairpiece or Wig where desired for wearing.
3. PRESS firmly where adhesive is applied to tape tab area for
bonding to scalp. (Allow several minutes for adhesive to securely
bond to your hair.) . (Help is not required for doing this procedure.)
RECOMMENDED CLEANING
SOLVENT TO USE
. Opti-Sol Solvent
REMOVING AND
PREPARING HAIRPIECE OR WIG FOR RE-BONDING
When extended wear bonding it is recommended to remove
your Hairpiece or Wig for cleaning and repair.
Use the following
steps for removing a Hairpiece or Wig:
1. Peel up the front of Hairpiece or Wig where secured using
toupee tape or adhesive.
2. Spray or apply solvent to tape residue or adhesive and allow
to soften.
3. Using a solvent soaked sponge; clean residue or adhesive from
tape tape area monofilament material.
Shampooing and repairing your Hairpiece or Wig should
be done before re-bonding Hairpiece or Wig once again.
---------------------------------------------------------------------------------------------
TOP PRIORITY
HARD BOND and ULTRA HOLD ADHESIVES ARE NOT RECOMMENDED FOR:
Gluing hair (or weft hair extensions) to your own hair
using Top Priority Hard Bond and Ultra Hold Adhesive is not recommended.
Using a 'HOT MELT' hair extension adhesive IS RECOMMENDED
for gluing hair to your own hair. (We do not carry these types
of adhesives.)
---------------------------------------------------------------------------------------------
When creating a custom Hairpiece or Wig using weft hair
- sewing the weft hair to the foundation material or cap using
a fine clear color plastic thread is recommended.
Plastic thread
is available from most fabric stores.
|